最大长度可达170mm
特性 Features
ø4mm交叉孔去毛刺过程
Deburring of cross-hole burrs generated in ø4mm drill processing
加工方法：从主孔两侧加工
Processing method：Processing from both sides of the primary processing hole.
| 材料 Material：S45C | 使用工具 Applied Tool : EZ-A12-5M | 工具转速 Tool rpm : 10,000rpm
| 主孔直径 Bore diameter in primary processing : ø10mm | 副孔直径 Bore diameter in secondary processing : ø4mm
| 深入速度 feed rate : 5mm/sec
材料和构造 Material and Structure
  | ■ 材料 世界上第一支陶瓷纤维油石制成的线材 每一根氧化铝纤维由1000个水晶结构的氧化铝单体组成，每个单体的直径只有10微米，使得其顶端拥有1000个高密度的切削刃口。 切削刃口可在加工过程中自行尖锐，以提供稳定而持续的研磨能力。 One Alumina Fiber Rod is made by binding together 1,000 Alumina Fiber Filaments which have the ideal crystal structure for grinding, each is only 10μm in diameter. The tip has 1,000 high-density cutting edges. The self-sharpening action of the cutting edge on the Fine Alumina Fiber Rod tips provides superior grinding performance. Continuous cutting edges provide stable and continuous grinding performance. ■ 構造 硬质线材拥有高度磨削能力，灵活的刷子形状可以柔软的接触工作表面 |
用途·事例 Usage, Applications
■ 用途
| 部件 Workpiece name | 用途 Usage | 加工内容 Contents |
| 喷油器体 Injector body | 底面抛光 Bottom surface finishing | 底部交叉孔去毛刺（斜孔） Bottom cross-hole deburring（slanted hole） |
| 喷油嘴 Injector nozzle parts | 底面抛光 Bottom surface finishing | 钻孔后底面去毛刺 Deburring bottom surface after drilling |
| 发动机喷管 Engine nozzle | 交叉孔去毛刺 Cross-hole deburring | 内壁抛光和交叉孔去毛刺 Inner wall surface finishing and cross-hole deburring |
| 燃油喷嘴零件 Fuel injector parts | 底面抛光 Bottom surface finishing | 锥形孔内壁去毛刺 Deburring inner wall surface of tapered hole |
| 发动机泵零件 Engine pump parts | 内壁去毛刺 Inner wall surface deburring | 端铣后内壁去毛刺 Inner wall surface deburring after end milling |
| 凸轮轴 Camshaft | 交叉孔去毛刺 Cross-hole deburring | 钻孔后交叉孔去毛刺 Cross-hole deburring after drilling |
| 传动轴 Shaft （for transmission） | 交叉孔去毛刺 Cross-hole deburring | 钻孔后与其他去毛刺刀具组合去除交叉孔毛刺 Cross-hole deburring by combined with another deburring tool after drilling. |
| 曲轴 Crankshaft | 交叉孔去毛刺 Cross-hole deburring | 钻孔后油孔去毛刺（斜孔） Deburring oil hole after drilling (slanted hole) |
| 轨道 Rail | 交叉孔去毛刺 Cross-hole deburring | 钻孔后?0.8mm偏心孔去毛刺和内壁抛光 Deburring and inner wall finishing after drilling of ?0.8mm（eccentric hole） |
| SCV壳 SCV housing | 底面抛光 Bottom surface finishing | 盲孔端铣后底端平面去毛刺 Deburring bottom surface of dead end hole after end milling |
使用方法 Use
  | *首先将磨棒插入圆孔一端，然后打开开关 * First insert the tip of the tool into the cylinder, and then switch “ON”. [Step1] 打开开关前先把磨棒插入孔中 |
| 目标孔直径 Target Bore Diameter in Primary Processing | 刷子直径 Brush Diameter a | 轴直径 Shaft Diameter b | 柄 | 总长 | 产品编码 Product Code |
| ?5～8mm | ?3mm | ?4mm | ?3mm | 120mm | EZ-A12-3M |
| ?5～8mm | ?3mm | ?4mm | ?4mm | 170mm | EZ-A12-3L  |
| ?8～10mm | ?5mm | ?6mm | ?6mm | 120mm | EZ-A12-5M |
| ?8～10mm | ?5mm | ?6mm | ?6mm | 170mm | EZ-A12-5L |
| ?10～20mm | ?7mm | ?8mm | ?6mm | 120mm | EZ-A12-7M |
| ?10～20mm | ?7mm | ?8mm | ?8mm | 170mm | EZ-A12-7L |
比较 Comparison
新浪微博